Year:
Make:
Model:

Arrington Performance

Filter Results:
Sort By:
 
  127 products
Get the high horsepower gains on your 2009 – 2010 5.7L HEMI without eliminating Variable Timing. These street performance camshafts have been tested and proven to add up to 40 horsepower and move the torque curve on a factory setup to the left increasing low end torque. These precision cams are engineered to pull off the street and into a drag race without any change in setup. These reground camshafts are the perfect marriage of pop and idle with incredibly fast throttle response making... 
Product Rating:
MSRP:$374.99
SKU:API-RG09-57-A
Dimensions:2x2x24
Weight:12.0 lbs
Price:$299.99
5.7 Tuning Now available up tp 2013! 6.4 Tuning Now Available! 2011 - 2013 Arrington Performance Supercharger with FREE SHIPPING!* As most new Challenger owners know, no one has been able to crack the 2011, 2012 or 2013 HEMI PCM. As a result, the aftermarket support for these cars has been limited. Sure a large selection of bolt-on parts exist for both the 5.7L and the 392 Challengers- but without tuning they cannot be safely installed. Now Arrington Performance offers a supercharger kit... 
Product Rating:
MSRP:$8,099.99
SKU:API-SC2011
Dimensions:24X24X36
Weight:125.0 lbs
Price:$7,550.00
All Arrington Performance Supercharger Kits now have an innovative and stylish new case design that you can customize. Click the checkbox below to Customize the Vertical Badge and a representative will contact you for your design. Design must be approved by our Engineering Dept. prior to manufacturing. More detailed designs may increase price."Waffle Iron" design cases are still available upon request.2013 5.7 Tuning Now available!Click Here to go to the New 2013 6.4L HEMI Hi-Power 8LB... 
Product Rating:
MSRP:$8,699.99
SKU:API-SC201357
Dimensions:16 x 24 x 36
Weight:150.0 lbs
Price:$7,550.00
API only recommends 8lb Supercharger kits on reinforced or forged bottom ends in 2013 392 engines. This 6lb supercharger kit is available for stock bottom ends. See 6.4 VVT HEMI Drop in forged piston upgrade for drop in piston kits. All Arrington Performance Supercharger Kits now have an innovative and stylish new case design that you can customize. Click the checkbox below to Customize the Vertical Badge and a representative will contact you for your design. Design must be approved by our... 
Product Rating:
MSRP:$8,699.99
SKU:API-SC201364
Dimensions:16 x 24 x 36
Weight:150.0 lbs
Price:$7,150.00
6.1 HEMI to 392 HEMI Stroker Our 392 HEMI built from a NEW 6.1 HEMI short block has the performance parts and power to win that you want for your classic muscle car, hotrod, drag strip dominator, or your daily driver. Our 392 HEMI Engine Kit is a part of our Arrington Signature Series which means our engineers have exhaustively studied and tested the designs and methods incorporated in this 6.1 HEMI short block to 392 HEMI build. This 392 HEMI kit starts with a 6.1 HEMI short block and packs... 
Product Rating:
MSRP:$5,749.99
SKU:API-HSB426AA
Dimensions:60 x 50 x 60
Weight:300.0 lbs
Price:$4,599.99
Our 392 HEMI built from a NEW 6.1 HEMI short block has the performance parts and power to win that you want for your classic muscle car, hotrod, drag strip dominator, or your daily driver. Our 392 HEMI Engine Kit is a part of our Arrington Signature Series which means our engineers have exhaustively studied and tested the designs and methods incorporated in this 6.1 HEMI short block to 392 HEMI build. This 392 HEMI kit starts with a 6.1 HEMI short block and packs in many of the same... 
Product Rating:
MSRP:$18,325.53
SKU:API-HMI-6.4L-KT1
Dimensions:60 x 50 x 60
Weight:600.0 lbs
You must add to cart to see the price
5.7 HEMI to 392 HEMI Stroker Our 392 HEMI built from a NEW 5.7 HEMI short block has the performance parts and power to win that you want for your classic muscle car, hotrod, drag strip dominator, or your daily driver. Our 392 HEMI Engine Kit is a part of our Arrington Signature Series which means our engineers have exhaustively studied and tested the designs and methods incorporated in this 5.7 HEMI short block to 392 HEMI build. This 392 HEMI kit starts with a 5.7 HEMI short block and packs... 
Product Rating:
MSRP:$5,749.99
SKU:API-HMI-5.7-SBK1
Dimensions:53.18 x 49.45 x 59.61
Weight:314.0 lbs
Price:$4,599.99
HEMI 410 Stroker Kit Increase the displacement of your 5.7L powered Dodge Challenger RT, Charger, Magnum, or Chrysler 300c with an Arrington performance HEMI 410 stroker kit. The Arrington 5.7 to 410 / 6.7L conversion has been dyno proven to increase torque and horsepower by 30% @ 160 mph over the stock motor. This performance rotating assembly includes: K-1 Crank, K-1 Rods with ARP bolts, Mahle Forged Aluminum Pistons, Toner Rings, and Clevite Bearings. Features a 4.080 Stroke. The kit... 
Product Rating:
MSRP:$3,999.99
SKU:API-HST410AA
Dimensions:55 x 50 x 55
Weight:400.0 lbs
Price:$3,199.99
Core charge for the 6.1L Based HEMI Long Block by Arrington Engines.BlockHeads  
Product Rating:
MSRP:$5,000.00
SKU:API-6.1 Longblock Core
Dimensions:0 x 0 x 0
Weight:0.0 lbs
Price:$4,000.00
6.1 HEMI to 426 HEMI Stroker This is our modern twist on the classic 426 that dominated NASCAR and the road in the muscle era. 585 HP with 560 Ft-lbs. of Torque. 30 % Increase in Torque and Power over the stock 6.1 HEMI at 160 mph. Both while maintaining a smooth ride! We have installed this engine in a Chrysler 300C and run it as an everyday car. The engine is comfortable and quiet with normal use, but ready to jump out of any stoplight and tear up the middle lane. "The drive ability is... 
Product Rating:
MSRP:$5,749.99
SKU:API-HSB426AA
Dimensions:55 x 50 x 55
Weight:300.0 lbs
Price:$4,599.99
426 HEMI Long Block Upgrade your 6.1L HEMI to our Gen III 426 HEMI.Add your own performance parts such as a ported intake manifold and throttle body to drop extreme and reliable power into your SRT-8 Charger, Chrysler 300C, Dodge Truck, or other LX, LC, truck bodies sporting the 5.7L or 6.1L HEMI. The 426 HEMI is based on a heavily modified 6.1L HEMI Block and then finished off with Arrington Performance upgrades including our HEMI 607 custom ground billet camshaft, and custom ported heads... 
Product Rating:
MSRP:$11,649.99
SKU:API-HLB426BA
Dimensions:55 x 50 x 55
Weight:400.0 lbs
Price:$9,319.99
426 HEMI Short BlockPerformance Foundation for a 426 HEMI build. Add your choice of heads and performance parts to customize your HEMI Engine. Our 426 HEMI is based on a heavily modified 6.1L HEMI Block and then finished off with Arrington Performance upgrades for maximum performance and reliability.  
Product Rating:
MSRP:$5,999.99
SKU:API-HSB426AA
Dimensions:53.18 x 49.45 x 59.61
Weight:300.0 lbs
Price:$4,799.99
Core charge for the 440 HEMI Crate Engine by Arrington Engines.Intake ManifoldBlockHeads  
Product Rating:
MSRP:$6,875.00
SKU:API-HCT440BA-CORE
Dimensions:0 x 0 x 0
Weight:0.0 lbs
Price:$5,500.00
The HEMI 440 : HEMI Engine SupersizedNow Shipping the HEMI 440 with up to 630 HP (up to 463 kW), in a box, on 93 octane. This complete HEMI Crate Motor with up to 600 ft/lbs (up to 813 N-m) torque comes with all the performance to get Roaring, and is ready to drop in your project car with everything you need from the wiring harness and sensors down to the dipstick. Built from performance parts including the NASCAR grade prepped 6.1 Block.Core Charge Note: A $3100.00 core charge will be... 
Product Rating:
MSRP:$16,949.99
SKU:API-HCT440BA
Dimensions:48x48x42
Weight:600.0 lbs
You must add to cart to see the price
HEMI 440 Stroker Kit Transform your 6.1L powered Dodge Challenger, Charger, Magnum, Chrysler 300c or Jeep SRT8 into a modern 440 with an Arrington performance HEMI stroker kit. The Arrington 6.1 to 440 conversion has been dyno proven to increase torque and horsepower by 30% @ 160 mph over the stock motor. We have installed this kit on daily driven LX's with great success- and have found it to provide a good balance of power, performance and ride comfort. This performance rotating... 
Product Rating:
MSRP:$4,499.99
SKU:API-CSK-440I
Dimensions:24x24x36
Weight:75.0 lbs
Price:$3,599.99
440 HEMI Long Block Upgrade your 6.1L HEMI to our Gen III 440 HEMI.Add your own performance parts such as a ported intake manifold and throttle body to drop extreme and reliable power into your SRT-8 Charger, Chrysler 300C, Dodge Truck, or other LX, LC, truck bodies sporting the 5.7L or 6.1L HEMI. The 440 HEMI is based on a heavily modified 6.1L HEMI Block and then finished off with Arrington Performance upgrades including our HEMI 648 custom ground billet camshaft, and custom... 
Product Rating:
MSRP:$12,024.99
SKU:API-HLB440BA
Dimensions:55 x 50 x 55
Weight:400.0 lbs
Price:$9,619.99
440 HEMI Short BlockPerformance Foundation for a 440 HEMI build. Add your choice of heads and performance parts to customize your HEMI Engine. Our 440 HEMI is based on a heavily modified 6.1L HEMI Block and then finished off with Arrington Performance upgrades for maximum performance and reliability.  
Product Rating:
MSRP:$6,124.99
SKU:API-HSB440AA
Dimensions:55 x 50 x 55
Weight:300.0 lbs
Price:$4,899.99
Our most popular parts package can add an extra 108 HP to your ride! The package includes an 85mm cast throttle body, our Phase 4 Ported Heads and a cc-586 Camshaft package. Upgrade to the cam of your choice and the throttle body of your choice for a custom package of performance parts to fit your HEMI engine powered vehicle. One Happy Customer Ricky E. Of Fayetteville, NC loved his 2009 Challenger SRT-8 but wanted a little more under his right foot, so he brought his ride to... 
Product Rating:
MSRP:$3,998.75
SKU:API-PWRTRP01
Dimensions:24x36x24
Weight:100.0 lbs
Price:$3,199.00
ShopHEMI now offers its 5.7L HEMI long block as a fully customize-able package. This long block comes with all of the bottom end rotating assembly parts found in short block motors, but also includes top end components such as performance heads and cams. Each custom long block is hand built by our master HEMI engine builders. Each engine is manufactured to match your needs and to complement all of your aftermarket parts. By selecting a 5.7L long block from ShopHEMI you will be saving your... 
Product Rating:
MSRP:$11,024.99
SKU:API-CM57HEMILB
Dimensions:42X42X42
Weight:360.0 lbs
Price:$8,819.99
Our 5.7 HEMI based stroker short block is now available your way. Add the options you want by customizing your HEMI below with the performance parts and power to win that you want for your classic muscle car, hotrod, drag strip dominator, or your daily driver. Our 5.7 HEMI Short Block Kit is a part of our Arrington Signature Series which means our engineers have exhaustively studied and tested the designs and methods incorporated in this HEMI stroker short block based build. This Custom HEMI... 
Product Rating:
MSRP:$5,124.99
SKU:API-CSTM57HEMI
Dimensions:42X42X42
Weight:360.0 lbs
Price:$4,099.99
Upgrade to the top choice of our HEMI Arrington Eagle 5.7 CNC Ported Heads. The valve springs, retainers and locators are upgraded and allow these heads to support cams up to .625” of lift. The valve seats are single point CNC cut with a Newen Epoc using the same designs and processes as our Dodge P7, P8 and TRD Phase 14 Race Heads. All intake and exhaust ports are smoothed using our engineered and dyno proven custom CNC methods designed by our in house HEMI engine builders and engineers. We... 
Product Rating:
MSRP:$2,299.99
SKU:API-PH6S
Dimensions:12x16x20
Weight:74.0 lbs
Price:$1,839.99
Upgrade to the top choice of our HEMI Arrington Eagle 5.7 CNC Ported Heads. The valve springs, retainers and locators are upgraded and allow these heads to support cams up to .625” of lift as well as the addition of the Manley oversized valves to increase air flow to the cylinders. The valve seats are single point CNC cut with a Newen Epoc using the same designs and processes as our Dodge P7, P8 and TRD Phase 14 Race Heads. All intake and exhaust ports are smoothed using our engineered and... 
Product Rating:
MSRP:$2,674.99
SKU:API-PH6BV
Dimensions:12x16x20
Weight:74.0 lbs
Price:$2,139.99
6.7L HEMI Long BlockUpgrade your 5.7L HEMI to our 6.7L HEMI.Add your own performance parts such as a ported intake manifold and throttle body to drop one liter of raw power into your Daytona Edition Charger, Chrysler 300C, Dodge Truck, or other LX, LC, truck bodies sporting the 5.7L HEMI without additional conversions or mount upgrade kits. The 6.7L HEMI is based on a heavily modified 5.7L HEMI Block and then finished off with Arrington Performance upgrades including our HEMI 586 custom... 
Product Rating:
MSRP:$12,499.99
SKU:API-HLB410BA
Dimensions:55 x 50 x 55
Weight:400.0 lbs
Price:$9,999.99
6.7L HEMI Crate Motor Upgrade your 5.7L HEMI to our 6.7L HEMI.Drop up to 550 hp and 550 ft./lbs. of torque into your LX body currently sporting a 5.7L HEMI.This upgrade drops one liter of raw power into your Daytona Edition Charger, Chrysler 300C, Dodge Truck, or other LX, LC, truck bodies sporting the 5.7L HEMI without additional conversions or mount upgrade kits. The 6.7L HEMI is based on a heavily modified 5.7L HEMI Block and then finished off with Arrington Performance upgrades... 
Product Rating:
MSRP:$18,325.53
SKU:API-HCT410BA
Dimensions:55 x 50 x 55
Weight:400.0 lbs
You must add to cart to see the price
5.7 HEMI to 410 (6.7L) HEMI Stroker Our 410 HEMI built from a NEW 5.7 HEMI short block has the performance parts and power to win that you want for your classic muscle car, hotrod, drag strip dominator, or your daily driver. Our 410 HEMI Engine Kit is a part of our Arrington Signature Series which means our engineers have exhaustively studied and tested the designs and methods incorporated in this 5.7 HEMI short block to 410 HEMI build boasting 550HP and 550ftlbs of torque. This 410 HEMI kit... 
Product Rating:
MSRP:$5,749.99
SKU:API-HSB410AA
Dimensions:55 x 50 x 55
Weight:400.0 lbs
Price:$4,599.99
You can now order a 6.1L HEMI long block that is customized to your specifications. ShopHEMI's long block includes the bottom end rotating assembly parts found in our custom HEMI short block motors, but adds top end components such as performance heads and cams. By selecting a 6.1L long block from ShopHEMI you will be saving yourself the time of putting together your top end, as well as, having the peace of mind that your engine was assembled by top HEMI engine builders. What's more, you do... 
Product Rating:
MSRP:$11,024.99
SKU:API-CM61HEMILB
Dimensions:42X42X42
Weight:360.0 lbs
Price:$8,819.99
Our 6.1 HEMI based stroker short block can now be tailored to your vehicle. Add the options you want by customizing your HEMI below with the performance parts and power you want.Whether you have a classic muscle car, hotrod, dragster, or daily driver- you can now specify each part of your custom 6.1L HEMI engine build. Then sit back and let shopHEMI's engine builders build your new HEMI motor. Our 6.1 HEMI Short Block Kit is a part of our Arrington Signature Series which means our engineers... 
Product Rating:
MSRP:$5,124.99
SKU:API-CSTM61HEMI
Dimensions:42X42X42
Weight:360.0 lbs
Price:$4,099.99
Upgrade to the top choice of our HEMI engine builders with the Arrington Phase 4 CNC Ported Heads. When tested against our competitors’ heads, these outperformed the nearest competitor by 18 horsepower. The valve springs, retainers and locators are upgraded and allow these heads to support cams up to .645” of lift. The valve seats are single point CNC cut with a Newen Epoc using the same designs and processes as our Dodge P7, P8 and TRD Phase 14 Race Heads. All intake and exhaust ports are... 
Product Rating:
MSRP:$2,299.99
SKU:API-HMIHD3AA
Dimensions:12x16x20
Weight:74.0 lbs
Price:$1,839.99
Upgrade your 6.1 HEMI SRT-8 Dodge Charger, SRT-8 Chrysler 300c, or SRT-8 Dodge Magnum on a budget. The throat of the ported intake manifold is opened to match our 90 mm HEMI throttle body. The Ports are port matched with Arrington ported heads, and the fuel injector bosses are reworked.All these modifications were designed and tested by our top HEMI engine builders and are performed by the HEMI engine builders using a combination of CNC milling and hand work for the best possible air flow... 
Product Rating:
MSRP:$937.50
SKU:API-90IMS1
Dimensions:12x24x12
Weight:30.0 lbs
Price:$750.00
Get maximum airflow from your intake manifold upgrade in your 6.1 HEMI SRT-8 Dodge Charger, SRT-8 Chrysler 300c, or SRT-8 Dodge Magnum. For the stage 2 intake manifold upgrade we spend twice the machining and milling time to achieve the highest airflow possible from a ported and polished intake manifold. The throat of the custom ported intake manifold is opened to match our 90 mm HEMI throttle body. The plenum is blended from the opening into the runners for a smoother transition and... 
Product Rating:
MSRP:$1,875.00
SKU:API-90IMS2
Dimensions:12x24x12
Weight:30.0 lbs
Price:$1,500.00
6.4 Based 426 HEMI Long Block Upgrade your 6.4L HEMI to our Gen III 426 HEMI.Add your own performance parts such as a ported intake manifold and throttle body to drop extreme and reliable power into your SRT-8 Challenger, Charger, Chrysler 300C, Jeep Grand Cherokee, or other LX, LC bodies sporting the 6.4L HEMI. The 426 HEMI is based on a heavily modified 6.4L HEMI Block and then finished off with Arrington Performance upgrades including our custom ported heads for maximum performance and... 
Product Rating:
MSRP:$11,649.99
SKU:API-HLB426BA-64
Dimensions:60 x 50 x 60
Weight:400.0 lbs
Price:$9,319.99
When considering supercharging your 6.4 HEMI Challenger SRT8 you start by scouring the internet for stories of boost and which supercharger provides the most power. The problem is that you see more stories of blown up engines and non-drivable new cars than you do happy customers. Now you can have your supercharger and peace of mind with Arrington Performance’s new Blower Prep Package for 5.7 and 6.4 HEMIs. This HEMI engine package is warrantied for 12 months / 12k Miles and replaces the... 
Product Rating:
MSRP:$999.99
SKU:API-DI392UG
Dimensions:42X42X42
Weight:360.0 lbs
Price:$769.99
The next generation of the most popular Modern Stroker HEMI is now available from Arrington Performance. This take on the classic NASCAR and Road Race dominating 426 HEMI boasts an increase in torque and power while maintaining a ride that is reliable and smooth enough to drive daily. Boasting a 20% increase in power over the factory 392 HEMI this VVT 426 Cubic Inch engine has all the power and durability for full competition use. Though this power is ready on demand at 80 mph on the highway... 
Product Rating:
MSRP:$5,749.99
SKU:API-HSB42664AA
Dimensions:42X42X42
Weight:360.0 lbs
Price:$4,599.99
The next generation of the Big Bore Modern Stroker HEMI is now available from Arrington Performance. This take on the Drag Race dominating 440 HEMI boasts huge increases in torque and power while maintaining a ride that is reliable and smooth enough to drive daily but loud enough to turn heads on the strip. Boasting a 25% increase in power over the factory 392 HEMI this VVT 448 Cubic Inch engine has all the power and durability for full competition use. Though this power is ready on demand... 
Product Rating:
MSRP:$6,124.99
SKU:API-HSB44864AA
Dimensions:42X42X42
Weight:360.0 lbs
Price:$4,899.99
Alternator Pulley 
Product Rating:
MSRP:$52.63
SKU:API-2.3APO2
Dimensions:3 x 6 x 6
Weight:1.0 lbs
Price:$42.10
Arrington introduces a fully functional handheld tune loader for 2011-2012 HEMI Vehicles!Available and shipping now the API Black Box Handheld Tuner is fully capable of loading complete tunes into the GPEC ECUs. These handheld tuners are now shipping with no additional cost with all 2011+2012 8 LB and 12 LB Supercharger Kits. These handheld tuners are also available as a standalone loader for $379. This unit comes preloaded and coded for your vehicle with a Premium Octane tune ready for... 
Product Rating:
MSRP:$429.99
SKU:API-BB-5502
Dimensions:8 x 8 x 4
Weight:2.0 lbs
Price:$379.99
NOW Shipping.Competition Single Pump Fuel SystemThe new API Competition Single Pump Fuel System by Arrington Performance eliminates the stock fuel pump and replaces it with a single high output turbine pump. This system utilizes a turbine 262 pump that is designed specifically for High Octane Race Fuels and pump gas. The new fuel system is rated for 700 horsepower based on current testing. The system utilizes the stock fuel basket and incorporate a custom high-pressure billet venturi system... 
Product Rating:
MSRP:$549.00
SKU:API-BFH-3B
Dimensions:8 x 8 x 4
Weight:10.0 lbs
Price:$499.00
Arrington custom made chrome alternator fan  
Product Rating:
MSRP:$104.63
SKU:API-0112
Dimensions:6 x 12 x 18
Weight:2.0 lbs
Price:$83.70
Arrington Performance's Twin Turbo Kit is available in many configurations and power levels to suit the driving style of your HEMI Performance ride. Our most popular configurations are listed here and available for immediate purchase. If you would like a racing configuration such as the one seen on Al Generalli Racing’s world record breaking Challenger, contact a professional service advisor today! Tuner / Base Turbo Kit w/58mm Turbos This kit will include 58 mm Turbos, complete piping and... 
Product Rating:
MSRP:$10,099.99
SKU:API-TTK
Dimensions:42x42x42
Weight:360.0 lbs
Price:$9,699.99
New HEMI Brake Kit: Arrington has partnered with Alcon to bring a superior high performance brake kit to the market at a fantastic price. It is the ONLY monoblock caliper on the market in this price range. Made for the Challenger RT, Charger RT, Magnum RT, and 5.7L 300c owners who want more stopping power. We are looking to gauge the demand in the aftermarket for a brake package that is comparable to or better than the other premium brands. Stopping when you want to, and more importantly... 
Product Rating:
MSRP:$4,161.25
SKU:API-BRKIT
Dimensions:14X14X24
Weight:60.0 lbs
Price:$3,329.00
Arrington Performance Driveshaft Safety Loop   The Arrington Performance driveshaft safety loop will reduce the risk of damage to you or your vehicle in the event of driveshaft failure. After installed, the loop surrounds the driveshaft at the U-Joint and helps to contain the shaft if it breaks- hopefully, preventing it from penetrating your car's interior or dragging and sparking on the ground. Fits the Dodge Challenger, Charger, Magnum, and Chrysler 300c 2005-2011 equipped with an... 
Product Rating:
MSRP:$212.49
SKU:API-DSLOOPAT
Dimensions:15x15x10
Weight:8.0 lbs
Price:$169.99
Our most popular parts package is now available for 2011, 2012, 2013, and 2014 HEMI Vehicles! Add up to 81 Horsepower and 69 ft. lbs of Torque with our new 2011 and up head and cam package. This package includes our new Phase 6 Ported Heads, a Comp Cams VVT Camshaft package, Pushrods, Calibration, API Black Box Loader, and all installation gaskets, hardware, bolts, and studs. Select the camshaft of your choice and other performance parts to maximize your new HEMI Engine powered build.... 
Product Rating:
MSRP:$3,499.99
SKU:API-11HP6C
Dimensions:24x36x24
Weight:100.0 lbs
Price:$2,999.99
2011-2013 5.7L Challenger and Charger Carbon Fiber Cold Air Intake Arrington Performance now offers a carbon fiber cold air intake for the 2011 - 2013 Dodge Challenger and Charger RT with 5.7L HEMI engines. It is one of the first on the market which is fully compatible with the new 5.7L motors. This system features a carbon fiber intake tube, a powder coated sheet metal air box, and a high flow performance air filter. The assembly was designed to attach using the factory throttle body elbow.... 
Product Rating:
MSRP:$563.49
SKU:API-VCAI-80-85-11V2
Dimensions:16x20x16
Weight:10.0 lbs
Price:$489.99
New Improved Design!!!! 392 HEMI Cold Air Intake for 2011, 2012, 2013 SRT8 Challengers, Chargers & 300Cs The redesigned Arrington Performance Cold air intake for 2011 and 2012 392 HEMI has been released! This new intake incorporates all the performance of API’s current version of the 2011-2013 SRT8 HEMI cold air intake but now boasts improved quality and a seamless air transition to the throttle body and angled intake manifold. Also included in this kit is a full carbon fiber heat shield... 
Product Rating:
MSRP:$563.49
SKU:API-VCAI392-85-2
Dimensions:16x20x16
Weight:10.0 lbs
Price:$489.99
2013 and up Arrington Performance Billet 84mm replacement for Magneti Marelli Throttle BodiesIn model year 2013 Chrysler introduced the Magneti-Marelli drive by wire throttle body for its HEMI V8 engines. This brushless motor design required a complete re-visioning of the previous VDO based Arrington part.Arrington is the originator of the late model HEMI big bore throttle body, and the only manufacturer to supply true, full-bore HEMI throttle bodies for 2013 and newer Dodge and Chrysler... 
Product Rating:
MSRP:$599.99
SKU:API-84MMTB
Dimensions:6 x 10 x 10
Weight:8.0 lbs
Price:$549.99
2013 and up Arrington Performance Billet 88mm replacement for Magneti Marelli Throttle Bodies In model year 2013 Chrysler introduced the Magneti-Marelli drive by wire throttle body for its HEMI V8 engines. This brushless motor design required a complete re-visioning of the previous VDO based Arrington part. Arrington is the originator of the late model HEMI big bore throttle body, and the only manufacturer to supply true, full-bore HEMI throttle bodies for 2013 and newer Dodge... 
Product Rating:
MSRP:$599.99
SKU:API-88MMTB
Dimensions:6 x 10 x 10
Weight:8.0 lbs
Price:$549.99
Arrington Performance now offers a performance strut tower brace for the Dodge Challenger, LX Charger, and Chrysler 300c equipped with a 5.7L or 6.1L HEMI engine. Installing a strut tower brace is an easy way to improve the handling of your car and dress up your engine bay at the same time. This unit works by tying the two strut pillar towers together and reinforces the connection by bracing them against the firewall. When your vehicle corners, the strut bar distributes the cornering load... 
Product Rating:
MSRP:$499.99
SKU:API-STB-F
Dimensions:10x48x24
Weight:12.0 lbs
Price:$399.99
Arrington Phase 6 CNC Ported Heads for 2011 and up 392 (6.4L) SRT8 Chargers, Challengers and 300Cs are now available. These upgraded 392 heads include improved valve springs, retainers and locators and allow support of cams with up to .645” of lift. The valve seats are single point CNC cut with a Newen Epoc using the same designs and processes as our Dodge P7, P8 and TRD Phase 14 Race Heads and our proven Phase 4 HEMI heads. All intake and exhaust ports are smoothed using our engineered and... 
Product Rating:
MSRP:$2,619.99
SKU:API-P-HEADS-64
Dimensions:12 x 12 x 48
Weight:80.0 lbs
Price:$2,099.99
THIS PRODUCT IS CURRENTLY ON BACK ORDER.Designed, engineered and manufactured in-house at API, our new Competition Catch-Can V 2.0 improves every aspect of our best in class Competition Catch-Can V 1.Machined from Billet 6061-T6 Aircraft AluminumImproved Filtering ProcessCollector Holds 32% MoreQuick Release Collector Billet Aluminum -8 AN FittingsWe believe our V 2.0 to be the best-in-class, not just for the HEMI enthusiast, but for all enthusiasts regardless of brand. V 2.0 utilizes a... 
Product Rating:
MSRP:$299.99
SKU:API-CCBLB2
Dimensions:12 x 12 x 6
Weight:8.0 lbs
Price:$259.99
API HEMI Fuel Rails Whether you are looking to increase your fuel supply to your high performance HEMI or just improve the looks of your engine bay on your stock HEMI setup, the Arrington Performance Competition high flow fuel rails are what you're looking for. Upgrading your fuel system to match the power potential of your upgraded vehicle will allow you to safely increase rear wheel horsepower and torque without risking engine detonation; whether you own a Dodge Challenger, Charger,... 
Product Rating:
MSRP:$312.49
SKU:API-5761FR
Dimensions:12x12x9
Weight:6.0 lbs
Price:$249.99
NAG1 D 3000 Stall Torque Converter This Arrington Performance NAG1 A 3200 stall torque converter has been designed to maximize performance on high powered, daily driven 5.7L and 6.1L HEMI engines. The A 3200 stall torque converter is appropriate for low boost supercharged or NA stroker engines that are used primarily in street driven cars and even cars that see the occasional track day. A 3200 has a higher than standard stall.A $150 Refundable Core charge is required(no core charge if... 
Product Rating:
MSRP:$968.75
SKU:API-NAG1-D-3200
Dimensions:14X14X4
Weight:15.0 lbs
Price:$775.00
NAG1 A 3500 Stall Torque Converter If you have a Dodge Challenger, Charger, Magnum, Chrysler 300c, or Jeep SRT-8 with a Paxton, Vortech, or Procharger supercharger, this is the torque converter for your vehicle. The Arrington Performance A 3500 features an approximate 3500+ stall and is a great complement to a NA stroker or centrifugal superchargered HEMI engine. This converter is ideal for street and strip cars who want high stall launches but still drive their car on road on a regular... 
Product Rating:
MSRP:$968.75
SKU:API-NAG1-A-3500
Dimensions:14X14X4
Weight:15.0 lbs
Price:$775.00
NAG1 AE 4500+ Extreme Stall Torque Converter  Arrington Performance's AE 4500+ will give your HEMI approximately 4500+ stall on an aluminum stroker motor. Note, this race use extreme stall torque converter is optimized for race only performance HEMI engines. It is not recommended for street cars. These units are custom built to match the horsepower of your race built Challenger or LX Charger, Magnum, or 300c. This torque converter is designed to let your transmission slip until you reach... 
Product Rating:
MSRP:$968.75
SKU:API-NAG1-AE-4500
Dimensions:14X14X4
Weight:15.0 lbs
Price:$775.00
Stage 3 Transmission The Arrington Performance Stage 3 Transmission is recommend for Challenger and LX owners who have engines that range anywhere from completely stock to built NA stroker motors running upwards of 550 rear wheel horsepower. The Stage 3 Transmission can also be used on mildly boosted, supercharged, or turbocharged 5.7 and 6.1 HEMIs with a NAG1 automatic transmission. On the all wheel drive Jeep platform this unit works well up to 475 awhp. Both the Stage 3 and Stage 4... 
Product Rating:
MSRP:$3,374.99
SKU:API-Trans-Stage-3
Dimensions:24X24X48
Weight:125.0 lbs
Price:$2,699.99
HEMI Stage 4 Transmission For those HEMI powered 5.7L and 6.1L vehicles equipped with Chrysler's NAG1 automatic transmission and producing upwards of 750 rwhp for the LX and Challenger, shopHEMI offers the Arrington Performance Stage 4 transmission. This performance built transmission includes a stage II valve body, high performance double sided forward Mercedes clutches, Mercedes seals, Mercedes gaskets, Mercedes oil filter, and Blue Top solenoids. This unit can withstand up to 625 awhp on... 
Product Rating:
MSRP:$4,373.75
SKU:API-Trans-Stage-4
Dimensions:24X24X48
Weight:125.0 lbs
Price:$3,499.00
HEMI Stage 5 Transmission For HEMI drag racers who's car's are producing more than 650 rwhp we offer the Arrington Performance NAG1 Stage 5 transmission. The Stage 5 transmission was built to withstand the abuse of extreme horsepower vehicles. This unit is primary designed for race use, and is not intended for daily drivers.A $800 Refundable Core charge is required(no core charge if installed at Arrington).  
Product Rating:
MSRP:$6,499.99
SKU:API-Trans-Stage-5
Dimensions:24X24X48
Weight:125.0 lbs
Price:$5,199.99
Arrington Stage I Valve Body  Let your HEMI transmission preform the way it should of straight from the factory. Arrington Performance NAG1 Stage I Valve Body allows your HEMI transmission, on your LX or Challenger, to shift firmer and quicker. Not only will the Arrington Valve Body upgrade remove shift lag, speed up shifts, and give your vehicle a sporty feel, but it will also increase clutch life. After you upgrade to a Stage 1 valve you will notice a that the more aggressively... 
Product Rating:
MSRP:$750.00
SKU:API-ValveBI
Dimensions:18X18X12
Weight:20.0 lbs
Price:$600.00
Arrington Stage II Valve Body  For high horsepower Dodge, Chrysler, and Jeep vehicles producing more than 500 rear wheel horsepower, shopHEMI recommends its HEMI NAG1 Stage 2 Upgraded Valve Body with Blue Top Solenoids. This kit will dramatically increase your transmission's responsiveness and allow your car to accelerate faster. The blue top solenoids included in the stage II kit will produce very firm downshifts.  Core Charge A $400 Refundable Core charge is required(no core... 
Product Rating:
MSRP:$1,375.00
SKU:API-ValveBII
Dimensions:18X18X12
Weight:20.0 lbs
Price:$1,100.00
NAG1 D 3000 Stall Torque Converter This torque converter is specially designed to control excessive tire spin which is a common for cars with twin screw and hybrid roots style superchargers. The D 3000 was designed to work well with 5.7L and 6.1L HEMI engines equipped with a Magnuson, Kenne Belle, SMS, or Arrington superchargers. A full one year warranty comes standard with the D 3000 as well as the other products in the Arrington NAG1 Transmission Solutions catalog.A $150 Refundable Core... 
Product Rating:
MSRP:$968.75
SKU:API-NAG1-D-3000
Dimensions:14X14X4
Weight:15.0 lbs
Price:$775.00
Hemi Flex Plate with ARP BoltsReplacing your stock flex plate is a good idea for high horsepower daily drivers and a must for those who compete in racing events. The Arrington Performance flex plate for the automatic NAG1 transmission is certified to 12,500 rpm, exceeds OEM specifications, and it is SFI 29.1 rated for NHRA and IHRA racing. Comes compelete with high strength grade ARP bolts. 
Product Rating:
MSRP:$281.24
SKU:API-FLEX291-ARP
Dimensions:15X15X4
Weight:15.0 lbs
Price:$224.99
Purchase an Arrington Performance 85mm Cast Throttle Body and Supercharger Edition Intake together in this HEMI Performance Package. Included is the Arrington Velocity Cold Air Intake for your Arrington Performance or Magnuson Supercharger. These custom carbon fiber cold air intake units take full advantage of the airflow capabilities of our Arrington throttle bodies to increase horsepower and torque. While the 85mm Cast Throttle Body allows your Supercharged HEMI engine to breath easier... 
Product Rating:
MSRP:$942.50
SKU:API-Package-85MM-SCIntake
Dimensions:10x15x20
Weight:10.0 lbs
Price:$754.00
Arrington Race Seat Cushion 
Product Rating:
MSRP:$4.00
SKU:API-STA-C
Dimensions:4 x 6 x 14
Weight:3.0 lbs
Price:$2.00
Arrington High Performance HEMI Camshafts  Call For Availability- Arrington introduces its new line of high performance camshafts for your 5.7L or 6.1L Dodge, Chrysler, or Jeep engine. These HEMI cams are dyno proven to increase a 5.7 motor to 334.4 horsepower and 343.9 ft-lbs of torque to an otherwise stock engine, with basic tuning. On larger 6.1 engines, power is bumped to 419.9 horsepower and 412.3 torque. Not compatible with VVT motors.For nearly a decade, Arrington has designed HEMI... 
Product Rating:
MSRP:$587.49
SKU:API-SR2B
Dimensions:2x2x24
Weight:12.0 lbs
Price:$469.99
Arrington Performance HEMI Camshafts with Push Rods Call For Availability-Arrington introduces its new line of high performance camshafts for your 5.7L or 6.1L Dodge, Chrysler, or Jeep engine. This package includes a set of our SR2B camshafts and push rods. SR2B HEMI cams are dyno proven to increase a 5.7 motor to 334.4 horsepower and 343.9 ft-lbs of torque to an otherwise stock engine, with basic tuning. On larger 6.1 engines, power is bumped to 419.9 horsepower and 412.3 torque. Not... 
Product Rating:
MSRP:$747.49
SKU:API-SR2B-PR
Dimensions:2x2x24
Weight:12.0 lbs
Price:$597.99
Arrington High Performance Camshafts  Call For Availability- Arrington introduces its new line of high performance camshafts for your 5.7L or 6.1L HEMI engine. These HEMI cams are dyno proven to add 52 horsepower and 20 ft-lbs of torque to an otherwise stock engine, with basic tuning. Not compatible with VVT motors.For nearly a decade, Arrington has designed HEMI camshafts using both engine and valvetrain simulation in order to build the best cams for professional race teams. Now this... 
Product Rating:
MSRP:$587.49
SKU:API-ST-3A
Dimensions:2x2x24
Weight:12.0 lbs
Price:$469.99
Arrington Performance HEMI Camshafts with Push Rods Call For Availability-Arrington introduces its new line of high performance camshafts for your 5.7L or 6.1L Dodge, Chrysler, or Jeep engine. This package includes a set of our ST3A camshafts and push rods. These HEMI cams are dyno proven to add 52 horsepower and 20 ft-lbs of torque to an otherwise stock engine, with basic tuning. Not compatible with VVT motorsFor nearly a decade, Arrington has designed HEMI camshafts using both engine and... 
Product Rating:
MSRP:$747.49
SKU:API-ST3A-PR
Dimensions:2x2x24
Weight:12.0 lbs
Price:$597.99
The HEMI cold air Intake you’ve been waiting for- Arrington Engines’ own take on performance, The Arrington Velocity Cold Air Intake. Bolt on 14 horsepower and 7 lbs of torque on a 5.7L HEMI 2009 Challanger R/T or an astounding 20 horsepower and 23 lbs torque on a 6.1L SRT8 2010 Challanger with only the cold air intake! These custom carbon fiber cold air intake units take full advantage of the airflow capabilities of our Arrington Signature or cast throttle bodies or boost the horsepower... 
Product Rating:
MSRP:$412.49
SKU:API-VCAI-90
Dimensions:20x19x16
Weight:12.0 lbs
Price:$369.99
The SRT8 Jeep cold air Intake you’ve been waiting for- Arrington Engines’ own take on performance, The Arrington Velocity Cold Air Intake for HEMI Jeeps. These custom carbon fiber cold air intake units take full advantage of the airflow capabilities of our Arrington Signature or cast throttle bodies or boost the horsepower output of a stock throttle setup. Designed for your high horsepower HEMI engine to incorporate swirl and velocity increasing measures, this intake creates a vortex based... 
Product Rating:
MSRP:$525.99
SKU:API-JEEPCAI-90
Dimensions:24x30x16
Weight:12.0 lbs
Price:$499.99
This Product Has Been Discontinued. Arrington Performance now offers the ST-3A and SR-2B camshafts.Get the highest horsepower gains on your 6.1 or 426 HEMI without sacrificing drivability. These street performance camshafts have been tested and proven and can pull off the street and into a drag race without any change in setup. For daily driven 6.1 HEMIs these steel billet core camshafts are the perfect marriage of pop and idle with the best power to drivability available, but in a... 
Product Rating:
MSRP:$562.44
SKU:API-CC586
Dimensions:2x2x24
Weight:12.0 lbs
Price:$449.95
Purchase an Arrington Performance 85mm Cast Throttle Body and 2011-2012 Challenger 5.7L HEMI Carbon Fiber Cold Air Intake together in this HEMI Performance Package. The included intake is Arrington's new carbon fiber cold air unit for the 2011 and 2012 Dodge Challenger equipped with 5.7L HEMI engines. This system features a carbon fiber intake tube, a powder coated sheet metal air box, and a high flow performance air filter. While the 85mm Cast Throttle Body allows your 5.7 HEMI to breath... 
Product Rating:
MSRP:$1,049.98
SKU:API-Package-85MM-2011-57Intake
Dimensions:10x15x20
Weight:10.0 lbs
Price:$839.98
API Competition 1500 HEMI Dual Pump Fuel Hat  The Arrington Performance Competition 1500 Fuel hat was designed for the extreme enthusiast. For HEMI engines running stroker engines sprayed with high shots of nitrous, high boost capable turbocharger systems, or high boost superchargers, this twin fuel hat system provides a complete in tank solution. By upgrading your HEMI fuel system you can support your current setup and prevent starvation if additional modifications are made. Arrington... 
Product Rating:
MSRP:$799.99
SKU:API-API-Dual-FHat
Dimensions:20x15x10
Weight:20.0 lbs
Original Price:$679.99
Sale:  $639.99
Distributor Clamp 
Product Rating:
MSRP:$29.00
SKU:API-0114
Dimensions:2 x 5 x 5
Weight:2.0 lbs
Price:$23.20
For the racer or daily driver who is looking to boost their HEMI without adding large cubic inches, the next generation of forged stock bore and stroke HEMIs is now available from Arrington Performance. This forged take on the factory Mopar 392 HEMI maintains a ride that is reliable and smooth enough to drive daily but strong enough to handle superchargers or twin turbo applications putting out big boost. Maintaining the factory’s 392 cubic inches but adding Arrington Performance’s proven... 
Product Rating:
MSRP:$4,299.99
SKU:API-HSB39264AA
Dimensions:42X42X42
Weight:360.0 lbs
Price:$3,899.99
HEMI 426 Late Model This is our modern twist on the classic 426 that dominated NASCAR and the road in the muscle era. 585 HP with 560 Ft-lbs. of Torque. 30 % Increase in Torque and Power over the stock 6.1 HEMI at 160 mph. Both while maintaining a smooth ride! We have installed this engine in a Chrysler 300C and run it as an everyday car. The engine is comfortable and quiet with normal use, but ready to jump out of any stoplight and tear up the middle lane. "The drive ability is... 
Product Rating:
MSRP:$18,325.53
SKU:API-HCT426BA
Dimensions:55 x 50 x 55
Weight:600.0 lbs
You must add to cart to see the price
The Arrington 85mm Cast Throttle Body The 85mm Cast Throttle Body is well suited for 5.7 or 6.1 HEMI engine owners who would like extra horsepower without extensive engine upgrades. Installation is a quick bolt up application for better performance. Just unhook intake tube and drive by wire plug, take out the 4 mounting bolts, then reverse those steps to put on the new throttle body. The cast throttle body is engineered and tested by HEMI engine builders for the best results. If you are... 
Product Rating:
MSRP:$549.99
SKU:API-85MMCTB
Dimensions:8x8x4
Weight:6.0 lbs
Price:$439.99
6 Week Lead Time due to Casting Service Delay. Arrington Performance's 85mm Cast Throttle Body with 4” outer diameter is designed to be paired with a cobra head elbow and connected to Arrington's Carbon Fiber Cold Air Intake on 5.7L HEMI engines. In order to give 2011+ LX and Dodge Challenger R/T vehicles a smother idle, this "Chubby" throttle body has improved electrical components. Other features include a radiused inlet and 85mm bore. This part is an ideal performance upgrade for... 
Product Rating:
MSRP:$549.99
SKU:API-85MMCTB-4-OD
Dimensions:8x8x4
Weight:6.0 lbs
Price:$439.99
THIS PRODUCT IS CURRENTLY ON BACK ORDER.The Arrington 85mm Cast Throttle BodyArrington Engine’s nitrous upgrade gives this cast 85mm HEMI throttle body an extra shot of performance. Achieve greatness on the street and track by bolting on this performance engineered throttle body to your 5.7 or 6.1 HEMI engine. To get even more from your performance part investment, add a custom performance tune and dyno options to your high performance bolt on horsepower boost. Contact Arrington Engines at... 
Product Rating:
MSRP:$749.99
SKU:API-85MMTB-2N
Dimensions:8x8x4
Weight:6.0 lbs
Price:$599.99
The Arrington 90mm Cast Throttle Body The 90mm Cast Throttle Body is well suited for 5.7 or 6.1 HEMI engine owners who would like extra horsepower without extensive engine upgrades. Installation is a quick bolt up application for better performance. Just unhook intake tube and drive by wire plug, take out the 4 mounting bolts, then reverse those steps to put on the new throttle body. The cast throttle body is engineered and tested by HEMI engine builders for the best results. If you are... 
Product Rating:
MSRP:$549.99
SKU:API-90MMCTB
Dimensions:8x8x4
Weight:6.0 lbs
Price:$439.99
THIS PRODUCT IS CURRENTLY ON BACK ORDER.The Arrington 90mm Cast Throttle Body Arrington Engine’s nitrous upgrade gives this cast 90mm HEMI throttle body an extra shot of performance. Achieve greatness on the street and track by bolting on this performance engineered throttle body to your 5.7 or 6.1 HEMI engine. To get even more from your performance part investment, add a custom performance tune and dyno options to your high performance bolt on horsepower boost. Contact Arrington Engines at... 
Product Rating:
MSRP:$749.99
SKU:API-90MMCTB-2N
Dimensions:8x8x4
Weight:6.0 lbs
Price:$599.99
These throttle bodies are made to order and will incurr a minimum 2 week lead time.The Arrington 90mm drive-by-wire Throttle Body Arrington Edition FULL BILLET 90mm Throttle Body! Only a limited quantity will be made. No core charge. Finally, a plug-and-play** replacement throttle body for your 2005 – Present 5.7 and 6.1 HEMI powered vehicles. Our billet throttle body is made from T-6061 aerospace grade aluminum. They are fully CNC machined in house at Arrington Engines. Each one has... 
Product Rating:
MSRP:$873.75
SKU:API-90MMTB
Dimensions:8x8x4
Weight:10.0 lbs
Price:$699.00
THIS PRODUCT IS CURRENTLY ON BACK ORDER.Arrington introduces the Commemorative Edition of the FULL BILLET 90mm Nitrous Throttle Body! Only a limited quantity will be made. The Arrington Billet 90mm drive-by-wire Throttle Body with Nitrous Injection Now the same great features of our billet 90mm throttle body  with the added bonus of our integrated nitrous injection. Clean up that engine bay and get rid of those plates and foggers. This all-in-one unit is capable of flowing up to a 200 shot... 
Product Rating:
MSRP:$1,123.75
SKU:API-90TBN2O
Dimensions:8x8x4
Weight:10.0 lbs
Price:$899.00
This product has been superceded by the Arrington Performance Competition Catchcan V2.0! Please click on the link below to view this new product. Arrington Performance Competition Catchcan V2 - Air Oil Separator  
Product Rating:
MSRP:$249.99
SKU:API-CCBLB1
Dimensions:12x12x6
Weight:6.0 lbs
Price:$229.99
HEMI BBQ SAUCE: The original Mopar recipe to HEMI power your next meal. Next time you grill out let others know what kind of power a HEMI packs. This sauce has just the right amount of heat and comes in an 18oz collectable glass jar that makes a statement even when the barbecue sauce is gone. Get your grill on!Ingredients: Catsup, Brown Sugar, Corn Syrup, Vinegar, Onions, Garlic Salt, Worcestershire sauce, and Spices.Nutrition Information: Serving Size: 2 Tbsp. (37g)Servings Per Container:... 
Product Rating:
MSRP:$13.99
SKU:API-MPR-HMI-BS
Dimensions:6 x 4 x 4
Weight:2.0 lbs
Price:$9.99
Arrington Performance Billet Engine Main Cap Set These new engine main caps are a perfect solution for your high performance 5.7L or 6.1L HEMI engine build. Upgrading your main caps will prevent unwanted main cap walk at high RPMs, making them a must for any high horsepower supercharged Mopar application. Without strong main caps, like this set, metal transfer and friction may occur between the cap and block of the center of the bearings. Weak main caps with cap walk can cause problems... 
Product Rating:
MSRP:$661.25
SKU:API-MAINCAPS
Dimensions:6X12X12
Weight:25.0 lbs
Price:$589.99
This Product is Out of Stock Till 11/20/2013.  Arrington Performance Roller Rockers The all new, latest and greatest. You asked, we're giving you the answers. 1.7 HEMI Roller Rockers. Fits all applications 5.7L, 426, 6.1L...you name it! (We're taking the next step in using cutting edge technology, NASCAR Horsepower knowledge, and putting it all together). The Arrington HEMI rocker arms will allow you to run double springs and take your HEMIs RPMs north of 6,500! 
Product Rating:
MSRP:$1,499.99
SKU:API-ROLLERROCKERS
Dimensions:12x12x8
Weight:20.0 lbs
Price:$1,199.99
Arrington Performance HEMI Supercharger Maximum horsepower for your HEMI from a TVS supercharger! This forced induction kit for the Dodge 6.1L and 5.7 platforms, such as Dodge Challenger LC, Dodge Magnum LX, Dodge Charger, and Chrysler 300c is rated at 8lbs or 12lbs of boost. Simply put, this Eaton TVS based hybrid-roots HEMI Supercharger force feeds additional air flow and pressure to your motor, giving your Mopar huge HP and TQ gains*. The extra power is delivered over the entire... 
Product Rating:
MSRP:$8,624.99
SKU:API-SC
Dimensions:24X24X36
Weight:125.0 lbs
Price:$6,999.99
Purchase an Arrington Performance 85mm Cast Throttle Body and Carbon Fiber Jeep Cold Air Intake together in this HEMI Performance Package. Included is Arrington's Velocity Cold Air Intake for HEMI Jeeps. These custom carbon fiber cold air intake units take full advantage of the airflow capabilities of our Arrington throttle bodies to increase horsepower and torque. While the 85mm Cast Throttle Body allows your HEMI engine to breath easier than the restrictive 80mm stock TB will allow.  
Product Rating:
MSRP:$987.48
SKU:API-Package-85MM-JeepIntake
Dimensions:10x15x20
Weight:10.0 lbs
Price:$789.98
HEMI lawn chair for you HEMI fanatics! You have the HEMI in you car, you have HEMI on your clothes, now sit on it too. At the car shows or where ever you go to show off your ride, sit in style in our HEMI lawn chair. Made of high quality durable materials that will last, each comes with it's own carry bag with shoulder strap for easy carrying. Pair with our Arrington logo seat cushion to sit in extra comfort all day long.  
Product Rating:
SKU:API-CHR-1
Dimensions:8x8x36
Weight:3.0 lbs
You must add to cart to see the price
Purchase an Arrington Performance 85mm Cast Throttle Body and 392 Cold Air Intake together in this HEMI Performance Package. The included intake is Arrington's new carbon fiber cold air unit for the 2011 and 2012 Dodge Challenger equipped with 392 / 6.4L HEMI engines. This system features a carbon fiber intake tube, a powder coated sheet metal air box, and a high flow performance air filter. While the 85mm Cast Throttle Body allows your 392 HEMI to breath easier than the restrictive 80mm... 
Product Rating:
MSRP:$1,174.98
SKU:API-Package-85MM-392Intake
Dimensions:10x15x20
Weight:10.0 lbs
Price:$939.98
Arrington Performance has custom engineered a fitting to adapt your -8AN fuel rails or other female -8AN connections to the factory fuel line in your late model HEMI powered vehicle. This black anodized 6061 billet aluminum CNC machined fitting allows for maximum adjustability by providing 360° of rotation of the quick connect fitting to keep the stock fuel line in its most natural state inside of your engine bay. 
Product Rating:
MSRP:$37.44
SKU:BSI-API-BNJO-DH
Dimensions:12 x 6 x 6
Weight:2.0 lbs
Price:$29.95
HEMI 392 Stroker Kit Increase the displacement of your 5.7L powered Dodge Challenger RT, Charger, Magnum, or Chrysler 300c with an Arrington performance HEMI 392 stroker kit. The Arrington 5.7 to 392 / 6.4L conversion has been dyno proven to increase torque and horsepower by 30% @ 160 mph over the stock motor. This performance rotating assembly includes: K-1 Crank, K-1 Rods with ARP bolts, Mahle Forged Aluminum Pistons, Toner Rings, and Clevite Bearings. Features a 4.080 Stroke. The... 
Product Rating:
SKU:API-CSK-392D
Dimensions:12 x 48 x 24
Weight:200.0 lbs
Price:$3,199.95
HEMI 426 Stroker Kit Transform your 6.1L powered Dodge Challenger, Charger, Magnum, Chrysler 300c or Jeep SRT8 into a modern 426 with an Arrington performance HEMI stroker kit. The Arrington 6.1 to 426 conversion has been dyno proven to increase torque and horsepower by 30% @ 160 mph over the stock motor. This performance rotating assembly includes: K-1 Crank, K-1 Rods with ARP bolts, Mahle Forged Aluminum Pistons, Toner Rings, and Clevite Bearings. Features a 4.080 Stroke. We have... 
Product Rating:
MSRP:$3,999.94
SKU:API-CSK-426I
Dimensions:24x24x36
Weight:75.0 lbs
Price:$3,199.95
Purchase an Arrington Performance 85mm Cast Throttle Body and Carbon Fiber HEMI Cold Air Intake together in this HEMI Performance Package. Included is Arrington's Velocity Cold Air Intake that fits the Dodge Challenger, Magnum, Charger, and Chrysler 300C from 2006-2010 Equipped with 5.7 or 6.1 HEMI engines. These custom carbon fiber cold air intake units take full advantage of the airflow capabilities of our Arrington throttle bodies to increase horsepower and torque. While the 85mm Cast... 
Product Rating:
MSRP:$962.48
SKU:API-Package-85MM-LXLCIntake
Dimensions:10x15x20
Weight:10.0 lbs
Price:$769.98
Currently on Backorder - Minimum 6 Week Lead-TimeHEMI Dual Fuel Hat Get a free upgrade to the black annodized finish!You asked for it, and Arrington listened- engineering and building its own dual fuel pump assembly. The Arrington Performance Billet Fuel Hat has been tested for use in 5.7 and 6.1 HEMI applications up to 700 RWHP. Beyond that level of power you will need our triple fuel hat which will be released soon. This kit comes with everything needed to add a Walbro 255 lph style 340... 
Product Rating:
MSRP:$499.99
SKU:API-BFH-1
Dimensions:12x12x9
Weight:6.0 lbs
Price:$399.99
Motor Mounts - Right Offset motor mount that mounts up to our R5 motor plate. 
Product Rating:
MSRP:$76.88
SKU:API-0203
Dimensions:6 x 6 x 6
Weight:2.0 lbs
Price:$61.50
Motor Mounts - Right motor mount that mounts up to our R5 motor plate 
Product Rating:
MSRP:$78.61
SKU:API-0227
Dimensions:6 x 6 x 6
Weight:2.0 lbs
Price:$62.89
Motor Mounts - Left motor mount that mounts up to our R5 motor plate 
Product Rating:
MSRP:$76.88
SKU:API-0202
Dimensions:6 x 6 x 6
Weight:2.0 lbs
Price:$61.50
Put a Late Model Hemi in your Early Model Muscle Car! ChipKillr is a complete kit for restoring “tune-ability” to the Chrysler 5.7 or 6.1 Liter late model HEMI engines. This is accomplished by exchanging the stock timing cover with a precision replacement unit designed to house a distributor; eliminating the need for electronic ignition controls.“It's exactly like having a classic HEMI,” says Joey Arrington, “it's perfect for your vintage muscle car, hot rod or any application which... 
Product Rating:
MSRP:$2,623.75
SKU:API-HMI-TMK-1
Dimensions:24x24x4
Weight:40.0 lbs
Price:$2,099.00
New HEMI Wrinkle Black Valve Covers Base Price includes Valve Covers Only Fits New 5.7 & 6.1 HEMI Engines Black textured Fins's Polished For that Old School Look (Polished & Color Coated Available) Inside Bosse's For External Burn Down Breathers Option. .750 Taller Than Stock I.D. 
Product Rating:
MSRP:$812.38
SKU:API-HVC1VCB
Dimensions:12x12x24
Weight:15.0 lbs
Price:$649.90
For owners of Arrington's 90mm Throttle Body, now you can add nitrous. Simply send us your 5.7 or 6.1 HEMI throttle body and the injection kit will be added using a dry CNC process. Retain your existing serial number with added performance of nitrous injection.  
Product Rating:
MSRP:$499.99
SKU:API-90N2OUP
Dimensions:0 x 0 x 0
Weight:15.0 lbs
Price:$399.99
Machine work to locate dampner to timing keyway on stock 6.1L or use second keyway on stroker cranks. Kit includes keystock and timing tape plus machine work to dampner.  
Product Rating:
MSRP:$62.50
SKU:API-CKD
Dimensions:6 x 2 x 6
Weight:6.0 lbs
Price:$50.00
Power Steering Bracket 
Product Rating:
MSRP:$101.64
SKU:API-0008
Dimensions:6 x 6 x 6
Weight:1.0 lbs
Price:$81.31
Precision Power Foam performance degreaser removes dirt and grime with ease. This American made multi-purpose cleaner can be used daily from the shop to the kitchen. The Power Foam secret formula is endorsed by our very own HEMI engine and Race Engine Builder Danny Glad to lift away dirt and grime with ease by utilizing a clinging foam formula for fast acting cleaning power that stays where you spray it. This high performance degreaser is all you’ll ever need to make your life a little... 
Product Rating:
MSRP:$8.99
SKU:DG-PPFCN
Dimensions:2 x 12 x 2
Weight:1.0 lbs
Price:$6.99
Precision Power Foam performance degreaser removes dirt and grime with ease. This American made multi-purpose cleaner can be used daily from the shop to the kitchen. The Power Foam secret formula is endorsed by our very own HEMI engine and Race Engine Builder Danny Glad to lift away dirt and grime with ease by utilizing a clinging foam formula for fast acting cleaning power that stays where you spray it. This high performance degreaser is all you’ll ever need to make your life a little... 
Product Rating:
MSRP:$58.69
SKU:API-DG-PPFCS
Dimensions:12 x 12 x 12
Weight:5.0 lbs
Price:$46.95
Return a 2009 or 2010 variable timing camshaft from your 5.7L HEMI Engine in good condition Within 60days and with core approval get this core charge refunded. This fee is required when ordering this product*. 
Product Rating:
MSRP:$218.75
SKU:API-CC541RG-CORE
Dimensions:0 x 0 x 0
Weight:0.0 lbs
Price:$175.00
Product Rating:
MSRP:$2,500.00
SKU:API-PH6S-CORE
Dimensions:0 x 0 x 0
Weight:0.0 lbs
Price:$2,000.00
Return a 5.7L HEMI Head Within 60days and get this core Charge Refunded. This fee is required when ordering this product*. 
Product Rating:
MSRP:$1,250.00
SKU:API-HMIHD57STK-CORE
Dimensions:0 x 0 x 0
Weight:0.0 lbs
Price:$1,000.00
Product Rating:
MSRP:$2,500.00
SKU:API-HMIHD3AA-CORE
Dimensions:0 x 0 x 0
Weight:0.0 lbs
Price:$2,000.00
Return a 6.4 HEMI block within 60 days and get this core Charge Refunded. This fee is required when ordering this product*. Cores are subject to inspection. Returns of rejected cores are owner’s responsibility and expense.  
Product Rating:
MSRP:$1,500.00
SKU:API-CC64SB
Dimensions:42x42x42
Weight:360.0 lbs
Price:$1,500.00
Product Rating:
MSRP:$400.00
SKU:API-ValveBCORE
Dimensions:0 x 0 x 0
Weight:0.0 lbs
Price:$400.00
Product Rating:
MSRP:$1,500.00
SKU:API-90IMS-CORE
Dimensions:0 x 0 x 0
Weight:0.0 lbs
Price:$1,000.00
Return a 5.7L HEMI or 6.1L Hemi Engine Within 60days and get this core Charge Refunded. This fee is required when ordering this product*. 
Product Rating:
MSRP:$1,062.50
SKU:API-57-CORE
Dimensions:0 x 0 x 0
Weight:0.0 lbs
Price:$850.00
Return a 5.7L HEMI or 6.1L Hemi Engine Within 60days and get this core Charge Refunded. This fee is required when ordering this product*. 
Product Rating:
MSRP:$2,500.00
SKU:API-57-61-S/ECORE
Dimensions:0 x 0 x 0
Weight:0.0 lbs
Price:$2,000.00
Return a 5.7L HEMI or 6.1L Hemi Engine Within 60days and get this core Charge Refunded. This fee is required when ordering this product*. 
Product Rating:
MSRP:$2,500.00
SKU:API-61-CORE
Dimensions:0 x 0 x 0
Weight:0.0 lbs
Price:$2,000.00
Product Rating:
SKU:API-TorqueConv-Core
Dimensions:0 x 0 x 0
Weight:0.0 lbs
Price:$150.00
Product Rating:
SKU:API-Trans-CORE
Dimensions:0 x 0 x 0
Weight:0.0 lbs
Price:$800.00
Product Rating:
MSRP:$1,250.00
SKU:API-FDiffSRT8-Core
Dimensions:0 x 0 x 0
Weight:0.0 lbs
Price:$1,000.00
Product Rating:
MSRP:$1,250.00
SKU:API-RDiffSRT8-Core
Dimensions:0 x 0 x 0
Weight:0.0 lbs
Price:$1,000.00
Product Rating:
MSRP:$1,250.00
SKU:API-RDiffSRT8-Core
Dimensions:0 x 0 x 0
Weight:0.0 lbs
Price:$1,000.00
Return a 5.7L HEMI or 6.1L Hemi Engine Within 60days and get this core Charge Refunded. This fee is required when ordering this product*. 
Product Rating:
MSRP:$2,500.00
SKU:API-57-61-CORE
Dimensions:0 x 0 x 0
Weight:0.0 lbs
Price:$2,000.00
This product is currently on backorder. Estimated Shipping week of 7-7-2014. Order now to be sure your catch can is in the next batch!The Arrington Performance S/E Air Oil Catch CanThe new Arrington performance S/E Catch can provides the same first stage filtration as the Arrington Performance HEMI Air Oil Separator but removes the second stage filter to provide a more compact and economical design to customers who want to add a second catch can to their high horsepower racing HEMI or a... 
Product Rating:
MSRP:$149.99
SKU:API-SECCBLB1
Dimensions:12 x 6 x 6
Weight:2.0 lbs
Price:$119.99
Arrington Performance BannerNow you can own a ShopHEMI.com / Arrington Performance Promotional Banner. These were used for the NMCA promotions 2011 season. Each banner measures approximately 72" x 34" and has 6 grommets. Other features include seamed edges, heavyweight acrylic fabric, and UV resistant dyes. This sign is perfect for garages, shops, and even outdoor events. Dealers who meet our WD buy-in requirements may receive a free shop HEMI banner.  
Product Rating:
MSRP:$31.24
SKU:API-BNR2011-AA
Dimensions:20x15x15
Weight:5.0 lbs
Price:$24.99
Your Gift-giving Worries Are Over! No shipping. No sizing. No guesswork. No returns. Avoid the last-minute holiday shopping hassles with a virtual gift card from shopHEMI.com. Just choose the amount you wish to give, check out and our shopHEMI virtual gift card will be delivered to your e-mail in just a few hours. Your favorite Hemi-lover can use this card to virtual gift card to choose anything on the shopHEMI.com site.Best of all you don't have to know a head from a header, or a Challenger... 
Product Rating:
SKU:API-E-GftCrd
Dimensions:0.2 x 2 x 6
Weight:1.0 lbs
Price:$0.00
HEMI 426 Late ModelThis is our modern twist on the classic 426 that dominated NASCAR and the road in the muscle era. 585 HP with 560 Ft-lbs. of Torque. 30 % Increase in Torque and Power over the stock 6.1 HEMI at 160 mph. Both while maintaining a smooth ride!We have installed this engine in a Chrysler 300C and run it as an everyday car. The engine is comfortable and quiet with normal use, but ready to jump out of any stoplight and tear up the middle lane. "The drive ability is amazing". We... 
Product Rating:
MSRP:$27,181.25
SKU:API-hmi-426103
Dimensions:0 x 0 x 0
Weight:400.0 lbs
Price:$21,745.00
Winston Cup Oil Pan Partitioned 
Product Rating:
MSRP:$1,625.00
SKU:API-MOR-43086
Dimensions:12 x 36 x 10
Weight:16.0 lbs
Price:$1,300.00
The API Fuel Hat Wiring Harness  This heavy gauge wiring harness makes installation even easier and provides the much needed functionality some of our competitor’s kits lack. This wiring system replaces your small diameter OEM wiring, which was not designed to handle the electrical draw from a multiple pump setup. The harness includes the in tank retrofit kit to allow utilization of the factory fuel siphon. In addition to the parts and pieces for in tank installation, the harness includes an... 
Product Rating:
MSRP:$374.99
SKU:API-API-Fuel-Wiring
Dimensions:20x15x10
Weight:10.0 lbs
Price:$299.99
This Product Has Been Discontinued. Arrington Performance now offers the ST-3A and SR-2B camshafts.Get the highest horsepower gains on your 6.1 or 426 HEMI without sacrificing drivability. These street performance camshafts have been tested and proven and can pull off the street and into a drag race without any change in setup. For daily driven 6.1 HEMIs these steel billet core camshafts are the perfect marriage of pop and idle with the best power to drivability available, but in a... 
Product Rating:
MSRP:$562.44
SKU:API-CC645
Dimensions:2x2x24
Weight:12.0 lbs
You must add to cart to see the price