Eibach Dodge Magnum, Charger, Chrysler 300 39.5mm / 41.5mm Wheel Alignment Kit - .75"
SKU:
EIB-5.66010K
Dimensions:
6X6X6
Weight:
2.0 lbs
Price:
$73.99
Product Tools
Eibach Alignment Kit:
After installing an Eibach Pro-Kit or Sportline spring set, your vehicle's alignment should always be checked. Once lowered, a wheel's camber may become "increasingly negative", meaning that the top of the tire is angled inward. While some "negative" camber aids in improving traction and road adhesion, too much can result in peculiar handling and accelerated tire wear. These alignment kits not only assist in adjusting a vehicle's camber back to factory specifications, but they also allow the experienced chassis tuner, utilizing the increased adjustment range, to "dial-in" a performance alignment that uses negative camber to maximize a chassis' potential.
IMPORTANT - Some vehicles may have two different upper control arm bushing diameters (39.5mm & 41.5mm) or both the same (39.5mm). To determine which alignment kit is required, please measure the outer bushing diameter on the most forward arm of the rear suspension:
1) One 39.5mm & one 41.5mm- Use Part# EB-5.66010K (+/-0.75 deg.) or EB-5.66020K (+/-1.5 deg.)
2) Both 39.5mm - Use Part# EB-5.66080K (+/-0.75 deg.) or EB-5.66085K (+/-1.5 deg.)
After installing an Eibach Pro-Kit or Sportline spring set, your vehicle's alignment should always be checked. Once lowered, a wheel's camber may become "increasingly negative", meaning that the top of the tire is angled inward. While some "negative" camber aids in improving traction and road adhesion, too much can result in peculiar handling and accelerated tire wear. These alignment kits not only assist in adjusting a vehicle's camber back to factory specifications, but they also allow the experienced chassis tuner, utilizing the increased adjustment range, to "dial-in" a performance alignment that uses negative camber to maximize a chassis' potential.
IMPORTANT - Some vehicles may have two different upper control arm bushing diameters (39.5mm & 41.5mm) or both the same (39.5mm). To determine which alignment kit is required, please measure the outer bushing diameter on the most forward arm of the rear suspension:
1) One 39.5mm & one 41.5mm- Use Part# EB-5.66010K (+/-0.75 deg.) or EB-5.66020K (+/-1.5 deg.)
2) Both 39.5mm - Use Part# EB-5.66080K (+/-0.75 deg.) or EB-5.66085K (+/-1.5 deg.)
Specs
- Precision alignment kits for maximum performance
- Prevents uneven tire wear
- Corrects excessive negative camber
- Wider range of camber adjustment - suitable for street or track tuning
- Front +/-1.5 degrees of adjustment
- Two year warranty
- Dodge Magnum 2WD / 4WD, V6 & HEMI 8 Cyl 2006 to 2010
- Dodge Charger 2WD / 4WD, V6 & HEMI 8 Cyl 2006 to 2010
- Chrysler 300 2WD / 4WD, V6 & HEMI 8 Cyl 2006 to 2010
