LX Complete Alignment Kit for 41.5mm fits Charger, Magnum, and 300C

Alignment Kit:

---

Progress Technology alignment components have been developed to meet the needs of today's HEMI enthusiasts with lowered LX vehicles. This kit fits 2005 - 2010 Dodge Charger, Dodge Magnum, and Chrysler 300c with 41.5 mm outer, forward most bushing- on the rear suspension(see note below). Includes instructions and all necessary hardware.

Lowering you LX increases your handling and lowered cars are sleek looking, but lowering without alignment will cause uneven tire wear. Generally speaking, lowered cars will gain negative camber which will result in exaggerated tire wear on the inside of your tires. In addition to the negative camber gain, lowered cars will also see a toe change which can dramatically reduce tire life if it's not corrected. Toe-in/toe-out is very critical to tire wear and should always be checked after you lower your car.

The good news is that toe settings are usually factory adjustable, this setting may realign your car after lowering. If it does not fix your alignment, this kit will correct the problem and offers more adjustability than the factory settings. If you don't do a proper alignment now, you will pay for it later because of excessive tire wear. By installing this HEMI alignment kit you will be able to adjust your car to its new stance, beyond the factory limits.

Measure the outer bushing diameter on the most forward upper arm on the rear suspension to figure out which part you need. If the bushing is 39.5mm then use part number 53.0630, if the bushing is 41.5mm then use part number 53.0631.