Small Block Mopar Carbureted Paxton Centrifugal Supercharger

Paxton's line up of carbureted superchargers will allow you to add boost to your small block Mopar V8s. With a NOVI supercharger will produce 7 to 8 PSI of boost at 6,000 RPM. Depending on your HEMI engine, you should see gains of 30-75%. Fits 1967-1976 A-body models such as Dart, Duster, Demon, Scamp, Valiant and 1967-1969 Plymouth Barracuda with 318, 340 and 360 CID. Also fits other cars using small block Mopar V-8s. Includes the carburetor enclosure for fuel delivery.

• Universal Small Block Mopar V8
• 1967-1976 A-body
• 1967-1969 Plymouth Barracuda with 318, 340 and 360 CID

• Produces 7-8 PSI of boost @ 6000 RPM on a lightly modified 340 CID
• Not 50-state legal
• Cast aluminum carburetor enclosure assembly (for the use with Holley #4150 type Quick Fuel Q-750 BAN or Demon 650 MD 4-BBL carburetor, mechanical secondaries, .120 needle and seat plus nitrophyll float set).
• The enclosure pressurizes the float bowls and throttle shafts for seamless response and correct air/fuel ratio
• It features front and rear -8 AN fuel inlet ports as well as multiple locations for pressure/vacuum connections
• Linkage arms, splined shaft and left/right hand spherical rod ends are included for simple throttle connection and adjustment
• If the Holley carburetor is used, an air diffuser (#8M011-001) is recommended
• 10-rib supercharger drive system with necessary belts and pulleys (for use in V-belt set-up)
• Billet aluminum mounting plate configuration for alternator
• Supercharger drive assembly
• Aluminum discharge tube with bypass valve and high-flow air filter

• A replacement hood or hood modifications may be required. To determine under hood clearance, measure the carb enclosures height of 7 1/2 to the top of your intake manifold.
• A custom fuel line assembly will be required for your carburetor. Theses include custom bent stainless steel lines, billet ~8 bulkhead adapter with fuel pressure port and plug, -8/-6 junction tee, aluminum swivel hose ends and USCG approved fuel hose. PN #8M110-020 Holley 4150-Type (w/dual metering blocks) & Quick Fuel carburation and PN #8M110-030 Demon Carburation
• High-volume, boost referenced fuel pump is not included and will be required.
• An optional aftermarket ignition amplifier is recommended, but not required. PN #5A001-008 Crane HI-6 (w/rev-limiter)
• Accessory v-belts will vary per application depending on accessory configuration and supercharger pulley diameters.
• Vehicle throttle cable/arm modifications may be required.