DId you know about our Hellcat 426 short block?
Need 1000HP? - here you go.
TRAKit at Ultimate Street
Car Challenge in NOLA!
Arrington Powered.

Watch the Arrington Performance Intro    

Wiring Harness for Arrington Competition 1500 Dual Pump Fuel Hat

MSRP:$374.99
SKU:API-API-Fuel-Wiring
Dimensions:20x15x10
Weight:10.0 lbs
Installation Skill Rating:
Arrington Performance
Base Price: $299.99
Price with Options: $299.99

Please select the available options below.

Options with an (*) are required.
Once you have filled in all the required options and pressed the Update Options button you will be able to add this item into your shopping cart.

*Wiring Harness Option  
Boost referenced wiring harness with indicator light
Nitrous referenced wiring harness with indicator light, Subtract -$10.00

The API Fuel Hat Wiring Harness 

This heavy gauge wiring harness makes installation even easier and provides the much needed functionality some of our competitor’s kits lack. This wiring system replaces your small diameter OEM wiring, which was not designed to handle the electrical draw from a multiple pump setup. The harness includes the in tank retrofit kit to allow utilization of the factory fuel siphon. In addition to the parts and pieces for in tank installation, the harness includes an indicator light that can be mounted in the driver’s line of sight. This light illuminates when the second fuel pump is activated by a Hobbs switch. This system also allows for a quick field repair requiring no tools should the primary pump fail during operation.

 
Fitment
  • Dodge Charger 2006 to 2012
  • Dodge Challenger LC 2008 to 2012
  • Magnum LX 2005 to 2008
  • Chrysler 300C 2005 to 2012
Fuel Assembly Features
  • Run two Walbro 400LPH (F90000262) pumps into your OEM fuel tank
  • Up to 1,500+ horsepower supported
  • Utilize Factory Fuel Feed Line as Return Line
  • All Billet aluminum construction
  • Ultra smooth internal fuel passages
  • Supports stock Dodge and Chrysler features
  • No caulking or welding was used to construct this fuel pump assembly
  • CNC machined in the USA
  • -8AN ports
  • Integrated Venturi fuel siphon
Parts List
  • API Competition 1500 Fuel Hat Assembly including two Walbro 400 LPH (F90000262) Turbine Pumps
  • Optional High Amp API Fuel Hat Wiring Harness
Tools Required
  • Safety glasses
  • Hammer or Rubber Mallet
  • Medium Flat Head Screw Driver
  • 10MM Metric Wrench or Equivalent
  • Wire Cutter
  • Wire Stripper
  • Heat Gun or Equivalent
  • Soldering Gun
  • Solder (Pref. Rosin Core or Equivalent)
Helpful Tools
  • Shop Vacuum Cleaner
  • Fuel Hat Ring Remover (Specialty Wrench)
 
Product Rating: (0.00)   # of Ratings: 0   (Only registered customers can rate)

There are no comments for this product.
 
Additional Options:
Share: