Edelbrock E-Force HEMI Supercharger Kits
Edelbrock E-Force HEMI Supercharger Kits
Does your HEMI equipped Dodge Challenger, Charger, Magnum, or Chrysler 300c need some extra muscle? Then get an Edelbrock E-Force Supercharger kit - quite possibly one of the most efficient supercharger that you can purchase for the current Dodge / Chrysler 5.7L and 6.1L HEMI engines. These complete supercharger kits provide optimal flow, minimum temperature climb, silent operation and durability only the Edelbrock name can promise. They feature minimum air restriction in and out of the supercharger for the most effective flow. They also include separate 7" long intake runners that will allow for optimum low end torque and excellent drivability. Each of these systems may be obtained with an optional warranty to provide you with piece of mind when installing one on your new LX or LC.
This E-Force supercharger system, like the other E-Force kits, uses Eaton TVS rotors- which are the same ones found in the Chevrolet Corvette ZR1, the Camaro ZL1, and the Cadallac CTS-V. Four lobe rotors with 160° of twist are just two of the reasons this rotor assembly produces huge amounts of power when paired with a HEMI engine or a LS powered GM muscle car.
Edelbrock E-Force Competition Supercharger kits are based off of Edelbrock's famous street systems, but are pared down to the essential components that a racer needs. These kits do not include extra components that experienced racers prefer to personalize for their own competitive advantage. As they are not for use on the street, they are intended for competition racing only.
Specifications
Fitment- 1530 - 2005-2008 5.7L HEMI LX
- 1532 - 2009-2011 5.7L HEMI LX and LC
- 1536 - 2005-2011 6.1L HEMI LX and LC
- Supercharger Manifold Assembly (Featuring Eaton TVS Rotors)
- New BHJ Crank damper (SFI certified)
- Cast Aluminum Alternator/Idler Bracket
- Heavy Duty Automatic Belt Tensioner
- Large 92 Sq-in Intercooler
- Full Face, Low Temp. Heat Exchanger for Intercooler System
- Goodyear® Gatorback Serpentine Belt
- Secondary 6-rib Supercharger Belt Drive with 7.50" Crank Pulley
- Electric Intercooler Water Pump
- Intercooler Recovery Tank
- Custom Molded Intercooler Hoses
- Extruded Aluminum Fuel Rails with -6 AN lines
- Fuel Injectors (52lb/hr)
- Supercharger Pulley
- Steel Idler Pulleys With Heavy Duty High Speed Bearings
- High Flow Air Intake Tube & Filter
- Edelbrock Aluminum Engine Covers
- Handheld Calibration Module, Preloaded with ALL Tunes
- Plug and Play, Electrical Harness & Installation Hardware
