Year:
Make:
Model:

Wiring Harnesses

Chrysler used two different coil packs on the late model Hemi engines. For connections on a carbureted engine a Harness will be required. For EFI engines, the Harness and an Adapter will be required. 
Sort By:
 
  30 products
AEM ECU Extension Harness: The Chrysler, Dodge, and Jeep AEM ECU Extension Harness, allows you to install electronics without cutting your factory wiring. Compatible with most HEMI engine management systems, these HEMI patch harness allow for splicing turbo timers, data loggers, and ancillary electronics. With these ECU harnesses you won't butcher your OEM wiring and you can return to stock in seconds.  
Product Rating:
MSRP:$327.98
SKU:AEM-30-2981
Dimensions:6X8X6
Weight:3.0 lbs
Price:$236.14
The API Fuel Hat Wiring Harness  This heavy gauge wiring harness makes installation even easier and provides the much needed functionality some of our competitor’s kits lack. This wiring system replaces your small diameter OEM wiring, which was not designed to handle the electrical draw from a multiple pump setup. The harness includes the in tank retrofit kit to allow utilization of the factory fuel siphon. In addition to the parts and pieces for in tank installation, the harness includes an... 
Product Rating:
MSRP:$374.99
SKU:API-API-Fuel-Wiring
Dimensions:20x15x10
Weight:10.0 lbs
Price:$299.99
American Racing Headers O2 Extension Harness Kit. This kit extends your stock oxygen sensor wiring to reach the new O2 sensor locations on ARH. 
Product Rating:
MSRP:$131.88
SKU:ARH-CHRYEXH
Dimensions:8x8x15
Weight:5.0 lbs
Price:$105.50
Diablosport Trinity OBD2 Cable: Note, Diablosport has modified their current generation of Trinity tuners so that they no longer require this OBD2 cable.Does your Trinity cable interfere with your driving? If so The DiabloSport Trinity Right Angle OBD2 Cable is what you need. This cable provides a 90 degree OBD2 end to give you some freedom under your vehicle's dash. Please check the configuration of your OBD2 port because this cable might not fit all applications. The DiabloSport T1025... 
Product Rating:
MSRP:$24.99
SKU:DBL-T-1025
Dimensions:4X4X4
Weight:1.0 lbs
Price:$22.45
MSD 6 HEMI Adapter  MSD 88815 adapter fits 2003-2005 HEMI 5.7L engines using the 6-HEMI controller system. Chrysler used two different coil packs on the late model Hemi engines. For connections on a carbureted engine a Harness will be required. For EFI engines, the Harness and an Adapter will be required. 
Product Rating:
MSRP:$165.95
SKU:MSD-88815
Dimensions:15X15X8
Weight:20.0 lbs
Price:$159.97
MSD 6 HEMI Wiring MSD 88863 fits 2003-2005 HEMI engines using the 6-HEMI controller system. Chrysler used two different coil packs on the late model Hemi engines. For connections on a carbureted engine a Harness will be required. For EFI engines, the Harness and an Adapter will be required. 
Product Rating:
MSRP:$211.15
SKU:MSD-88863
Dimensions:15X15X8
Weight:20.0 lbs
Price:$192.99
MSD 6 HEMI Adapter  MSD 88816 adapter fits 2006-2008 HEMI 5.7L engines using the 6-HEMI controller system. Chrysler used two different coil packs on the late model Hemi engines. For connections on a carbureted engine a Harness will be required. For EFI engines, the Harness and an Adapter will be required. 
Product Rating:
MSRP:$165.95
SKU:MSD-88816
Dimensions:15X15X8
Weight:20.0 lbs
Price:$159.97
MSD 6 HEMI Wiring MSD 88864 fits 2006-2008 5.7L HEMI engines using the 6-HEMI controller system. Chrysler used two different coil packs on the late model Hemi engines. For connections on a carbureted engine a Harness will be required. For EFI engines, the Harness and an Adapter will be required. 
Product Rating:
MSRP:$211.15
SKU:MSD-88864
Dimensions:15X15X8
Weight:20.0 lbs
Price:$192.99
Manufactured by Essex Industries, one of the most renowned fuel system manufacturers, these state-of-the-art Electric Fuel Pumps offer maximum performance in a compact package. With anodized aluminum housings and high-quality internals, they are both strong and durable. Edelbrock 1795 universal fuel pump relay kit is designed specifically for proper fuel pump wiring, this 30 amp relay kit is strongly recommended when installing Edelbrock electric fuel pumps, part numbers 1791 and 1792.The... 
Product Rating:
MSRP:$76.74
SKU:EDE-1795
Dimensions:7.75x2x8.75
Weight:1.0 lbs
Price:$55.95
Perfect Circuit wiring harnesses feature all OEM-style connectors high temperature oil resistant wiring and puncture-resistant outer sheathing for years of dependable service. 
Product Rating:
MSRP:$543.94
SKU:FAS-301104
Dimensions:4 x 18 x 18
Weight:10.0 lbs
Price:$407.95
Designed as a complete stand alone Electronic Fuel Injection (EFI) system that replaces your factory computer the XFI EFI system features a fully user-programmable Engine Control Unit (ECU) and clearly labeled wiring harness that are surprisingly easy to install a snap to tune with any laptop or desktop computer and capable of performance that will blow your mind. 
Product Rating:
MSRP:$160.33
SKU:FAS-301200
Dimensions:4 x 18 x 18
Weight:10.0 lbs
Price:$120.55
Innovate Motorsports 18 ft sensor extention cable for the LM-2 and MTX-L. 
Product Rating:
MSRP:$86.90
SKU:IVM-3828
Dimensions:8X8X5
Weight:2.0 lbs
Price:$79.00
This custom 6" cable will allow you to connect and/or daisy chain the following products: XD-16, LC-1, LMA-3, DL-32, SSI-4, TC-4, & ST-12. Also used to connect the LM-1 to the XD-16. 
Product Rating:
MSRP:$16.50
SKU:IVM-3789
Dimensions:8X8X5
Weight:1.0 lbs
Price:$15.00
Wall AC power adapter for Innovate Motorsports LM-1 meter only. 
Product Rating:
MSRP:$42.90
SKU:IVM-3732
Dimensions:8X8X5
Weight:2.0 lbs
Price:$39.00
This custom cable will allow you to connect and/or daisy chain the following products: XD-16, LC-1, LMA-3, DL-32, SSI-4, TC-4, & ST-12. Also used to connect the LM-1 to the XD-16. 
Product Rating:
MSRP:$16.50
SKU:IVM-3760
Dimensions:8X8X5
Weight:1.0 lbs
Price:$15.00
This custom cable will allow you to connect and/or daisy chain the following products: XD-16, LC-1, LMA-3, DL-32, SSI-4, TC-4, & ST-12. Also used to connect the LM-1 to the XD-16. 
Product Rating:
MSRP:$16.50
SKU:IVM-3789
Dimensions:8X8X5
Weight:1.0 lbs
Price:$15.00
The LC-1 is a complete wideband controller built in to a sealed cable. It features the same award-winning patented digital measurement principal found in the LM-1, and includes digital input, output, and 2 programmable analog outputs. 
Product Rating:
MSRP:$163.90
SKU:IVM-3744
Dimensions:8X8X5
Weight:2.0 lbs
Price:$149.00
Innovate Motorsports 6 ft. long, custom-molded serial cable for downloading logged data from LM-1 to your PC, or for programming/updating the LM-1 firmware. 
Product Rating:
MSRP:$16.50
SKU:IVM-3740
Dimensions:8X8X5
Weight:1.0 lbs
Price:$15.00
Innovate Motorsports 3 ft sensor extention cable for the LM-2 and MTX-L. 
Product Rating:
MSRP:$31.90
SKU:IVM-3843
Dimensions:8X8X5
Weight:1.0 lbs
Price:$29.00
Analog input and output accessory cable for LM-2 (Needed for RPM Input). 
Product Rating:
MSRP:$31.90
SKU:IVM-3811
Dimensions:8X8X5
Weight:1.0 lbs
Price:$29.00
Innovate Motorsports OBD-II / CAN Interface Accessory Cable for LM-2. 
Product Rating:
MSRP:$31.90
SKU:IVM-3809
Dimensions:8X8X5
Weight:1.0 lbs
Price:$29.00
LM-2 Serial Patch Cable makes the LM-2 MTS Compatible (LC-1, LMA-3, DL-32, SSI-4, TC-4). Four pin Molex to serial 2.5mm. Not included with LM-2 kit. 
Product Rating:
MSRP:$16.50
SKU:IVM-3812
Dimensions:8X8X5
Weight:1.0 lbs
Price:$15.00
Replacement USB Cable for LM-2. Included in LM-2 kits. 
Product Rating:
MSRP:$8.80
SKU:IVM-3813
Dimensions:8X8X5
Weight:1.0 lbs
Price:$8.00
The Serial Program Cable will allow you to connect the MTX-L and LM-2 to your PC. 
Product Rating:
MSRP:$16.50
SKU:IVM-3840
Dimensions:8X8X5
Weight:1.0 lbs
Price:$15.00
Innovate Motorsports 10-ft. long, for direct connection on LM-1 to cigarette lighter or accessory plug. LM-1 only. 
Product Rating:
MSRP:$16.50
SKU:IVM-3740
Dimensions:8X8X5
Weight:1.0 lbs
Price:$15.00
Innovate Motorsports replacement Power Cable. Included with LM-2 kit. 
Product Rating:
MSRP:$20.90
SKU:IVM-3808
Dimensions:8X8X5
Weight:1.0 lbs
Price:$19.00
Innovate Motorsports LM-1 only, 10-ft. long, for direct connection of LM-1 to Bosch/VW plug on LSU4.2. 
Product Rating:
MSRP:$27.50
SKU:IVM-3738
Dimensions:8X8X5
Weight:1.0 lbs
Price:$25.00
Innovate Motorsports replacement 8ft Sensor Cable. Included in LM-2 kits. 
Product Rating:
MSRP:$53.90
SKU:IVM-3810
Dimensions:8X8X5
Weight:1.0 lbs
Price:$49.00
The Serial Program Cable will allow you to connect any of the following devices to your PC; Innovate Motorsports LC-1, XD-16, LMA-3, DL-32, SSI-4, or TC-4. 
Product Rating:
MSRP:$16.50
SKU:IVM-3746
Dimensions:8X8X5
Weight:1.0 lbs
Price:$15.00
Adapter for computers without Serial ports. This cable will convert Serial to USB so that you can connect select Innovate Motorsports products to your computer. Hardware drivers included. 
Product Rating:
MSRP:$36.30
SKU:IVM-3733
Dimensions:8X8X5
Weight:1.0 lbs
Price:$33.00