DId you know about our Hellcat 426 short block?
Need 1000HP? - here you go.
TRAKit at Ultimate Street
Car Challenge in NOLA!
Arrington Powered.

Watch the Arrington Performance Intro    

Level 5 Bolt-In Axles 2006-2010 6.1L SRT8 w/ Paramount 8.8 Conversion

MSRP:$1,759.98
SKU:DSS-RA7282X5-PP RA7283X5-PP
Dimensions:36X8X12
Weight:50.0 lbs
Installation Skill Rating:
Manufacturer:Driveshaft Shop
Driveshaft Shop
Price: $1,599.98
Quantity:
Paramount Performance 8.8 HEMI Axle Upgrade:

If you have a 2006-2010 car WITH A 8.8 CONVERSION and want the very best and strongest axle, this is the kit for you. This axle is designed for a real race car that just happens to be street driven. we have started with an outer CV that is made from solid billet material that is stronger than any of the Aerospace materials on the market today, we have completely custom made REM polished internals out of that same material and just to make sure this is the strongest axle we have increased the center bar's diameter by 25% and is a thru hardened race worthy material. To cover the inner CV we have developed a modified Porsche style CV that we have put the same REM polished high grade internals with that same big spline. We went on to make a real nice billet flange to stick into the Ford 8.8 diff.

  1. Full certified 300m center bars there is a reason the Viper T56 uses a 30 spline and its the reason we do too. (same center bar used in our level 5 axles for the stock rear)
  2. Certified 4340AQ cages REM polished with re-designed radiuos on the cage windows, this is a major weak point for the axle. The fact is the other axles offered for this car uses the factory cage (and even the grease)
  3. Our Center race in the Cv is certified 300m, this should need no explanation, no one else uses this and we can prove it.
  4. Rolled splines,most know a forging is always stronger than billet. Here at The Driveshaft shop we roll our splines, this is by far the strongest way to form a spline and is far superior to "old technology" cut splines.
  5. The outer CV is made from Billet aircraft quality and certified material and then heat treated to our demanding specs, no other CV on the arket today is close to the strength of this end
 
Specs:
  • Bar and Internal CV are both Upgraded
  • Rated for Applications up to 1400 Horsepower
  • Full warranty for 1 year
Fits the Following SRT-8 6.1L HEMI Powered Vehicles
  • Dodge Challenger SRT8 6.1L LC 2009 - 2010
  • Chrysler 300 SRT8 6.1L LX 2009 - 2010
  • Dodge Charger SRT8 6.1L LX 2009 - 2010
  • Dodge Magnum SRT8 6.1L LX 2009 - 2010
 
Product Rating: (0.00)   # of Ratings: 0   (Only registered customers can rate)

There are no comments for this product.
 
Additional Options:
Share: