DId you know about our Hellcat 426 short block?
Need 1000HP? - here you go.
TRAKit at Ultimate Street
Car Challenge in NOLA!
Arrington Powered.

Watch the Arrington Performance Intro    

Arrington HEMI Automatic Transmission Driveshaft Loop

MSRP:$212.49
SKU:API-DSLOOPAT
Dimensions:15x15x10
Weight:8.0 lbs
Arrington Performance
Price: $169.99
Quantity:
Arrington Performance Driveshaft Safety Loop  

The Arrington Performance driveshaft safety loop will reduce the risk of damage to you or your vehicle in the event of driveshaft failure. After installed, the loop surrounds the driveshaft at the U-Joint and helps to contain the shaft if it breaks- hopefully, preventing it from penetrating your car's interior or dragging and sparking on the ground. Fits the Dodge Challenger, Charger, Magnum, and Chrysler 300c 2005-2011 equipped with an automatic transmission. It is not compatible with cars with the 6-speed manual transmission.

Why Do I Need An Arrington Safety Loop?

While driveshaft breakage is rare, U-Joint failures on high horsepower HEMIs are not uncommon. When a universal joint fails without a safety loop, the driveshaft is free to fall to the ground. If the failure occurs at the front U-Joint, the driveshaft can imbed itself into the road or track surface and catapult the car at speed. Even if you are not racing, the safety offered by this driveshaft safety loop is well worth the peace of mind that it provides.

Drag Racing Requirements

Generally, the NHRA requires that vehicles with racing slicks have a driveshaft safety loop if they are capable of running at or below a time of 13.99 1/4-mile or 8.59 1/8-mile. Cars with drag radials or street tires, usually must have a safety loop if they can achieve a time of 11.49 1/4-mile or 7.35 1/8-mile. Before taking your HEMI Challenger or LX to the track, check your sanctioning body's rulebook and ask your local tech inspector about their specific safety requirements.

 
Fits
  • Dodge Challenger 2008-2011 with Automatic Transmission
  • Dodge Charger 2006-2011 with Automatic Transmission
  • Dodge Magnum 2005-2008 with Automatic Transmission
  • Chrysler 300c 2005-2011 with Automatic Transmission
Specs
  • Helps to contain LX / Challenger driveshafts in the event of a front U-joint failure, thereby preventing it from dragging on the ground and possibly flipping or wrecking your car
  • Bolt-on design allows for quick and easy installation
  • Hardware included
  • Fabricated from heavy-gauge steel in the USA
  • Black finish
Included Parts

  • Driveshaft Safety Loop Base
  • Driveshaft Safety Loop
  • 4 - 5/16" x 1.25 grade 8 bolts
  • 4 - 5/16" Nylon insert nuts
  • 8 - 5/16" flat washers
Tools Required

  • Ratchet or equivalent
  • 13mm socket
  • 15mm socket
  • 5/16 socket
  • Floor jack or equivalent
Helpful Tools

  • Hydraulic vehicle lift
  • Hydraulic transmission support lift
 
Product Rating: (0.00)   # of Ratings: 0   (Only registered customers can rate)

There are no comments for this product.
 
Additional Options:
Share:
Downloads:
Popular HEMI Performance Parts: