DId you know about our Hellcat 426 short block?
Need 1000HP? - here you go.
TRAKit at Ultimate Street
Car Challenge in NOLA!
Arrington Powered.

Watch the Arrington Performance Intro    

Mopar EFI 5.7/6.1 85mm Hemi Plate System

SKU:N2O-00-10131
Manufacturer:Nitrous Outlet
Nitrous Outlet
Base Price: $669.99
Price with Options: $669.99

Please select the available options below.

Options with an (*) are required.
Once you have filled in all the required options and pressed the Update Options button you will be able to add this item into your shopping cart.

*Bottle Size  
No Thank You
10lb Nitrous Outlet Bottle, Add $100.00
15lb Nitrous Outlet Bottle, Add $175.00
12lb Carbon Fiber Bottle, Add $550.00
*Purge Kit  
No Thank You
Nitrous Outlet -4AN Purge Kit, Add $119.99
Nitrous Outlet "Big Show" -4AN Purge Kit, Add $139.99
X-Series -4AN Purge Kit, Add $99.99

Details

Gain up to 400 HP. This wet nitrous plate system comes out of the box ready to spray up to 200 HP but is capable flowing up to 400 HP with additional jetting, and a 6 AN main feed line upgrade.


Superior Atomization. This injection plate has 6 specially designed nitrous and fuel discharge ports that completely saturate the air intake charge with the best atomized mixture possible. For higher horsepower levels proper distribution into the air stream is critical for equal cylinder to cylinder distribution.


Race Proven. Nitrous Outlet 5.7/6.1 Hemi plate systems are the only plate systems available that are capable of safely delivering a precise atomized mixture of nitrous and fuel into the intake plenum equally. This system includes everything needed for installation and will fit on any LX based application including Dodge Challenger, Charger, Magnum, and Chrysler 300C.


Wet Nitrous Plate. This system includes a billet aluminum plate to fit 5.7/6.1L Hemi intakes with an 85mm throttle body and is capable of flowing up to 400 HP of nitrous. Each billet plate has a black anodized finish with laser etched logo and fuel/nitrous labels.


Wide Open Throttle Activation. This system includes a wide open throttle (WOT) switch that only allows the system to be activated when the motor is at full throttle. This safety feature will prevent engine damage and lean spikes.


Complete System. This system includes all of the necessary components, jetting, hardware, chrysler fuel rail adapter, and wiring to install a wet nitrous system capable of adding 200 HP to your vehicle.


Application. This system is specifically designed to fit the 5.7/6.1L Hemi intake with 85mm throttle body including the Dodge Ram, SRT-8 Jeep, Challenger, Magnum, and LX/300C.


***Please Specify if you have an Arrington, or other aftermarket throttle body.***

 
QUICK OVERVIEW
Flow Up To 400 HP
400+HP Solenoids
High Flow Billet Aluminum Nitrous Plate
Fits 5.7/6.1 85mm Hemi Intake
Chrysler Fuel Rail Adapter
All Hardware, Electrical, and Jetting Included
E85 Compatible with different jetting
Includes Jetting for 50-75-100-150-200 HP

Additional Information

SKU00-10131
Number of StagesSingle Stage
Max Flow (Per Stage)400
Dry/WetWet
Number of Solenoids2
Nitrous Solenoid Size.122 Orifice
Fuel Solenoid Size.187 Orifice
Relay and Harness Included?Yes
Fuel Adapter Fitting Included?Yes
Included Jetting (in Horsepower)50-100-150-200
Fuel Pressure55 PSI
Solenoid Bracket(s)Universal
Main Feed Line Size4AN
Hard or Soft Line (From Solenoids)Soft Line
Vehicle MakeDodge
Vehicle ModelChallenger, Dodge Truck, LX/300C, SRT-8 Jeep
Vehicle YearUniversal

 
Product Rating: (0.00)   # of Ratings: 0   (Only registered customers can rate)

There are no comments for this product.
 
Additional Options:
Share: